Campervan Overhead Locker - Plywood or MDF
Campervan Overhead Locker - Plywood or MDF
Give travel essentials a tidy home with the 888Camper overhead locker. Two rounded cupboard doors create a clean front, while a centre divider separates the storage into two compartments. Choose from eight widths, all with a compact 250 mm depth and height.
Optional fitting kit - £9.99
Add a fitting kit using the Fitting kit option above. The kit includes L brackets and screws to fix your furniture to your campervan wall or ceiling. Select With fitting kit (+£9.99) to add one kit to the selected furniture variant, or Without fitting kit to buy the furniture at its original price. Any assembly hardware already included with the furniture remains included in both options.
Use fixing points suitable for the furniture load and check that the supplied fixings suit your van’s wall or ceiling construction.
Choose your material
Select Plywood or MDF using the Material option. Both materials cost the same for the selected size. Product images show the plywood version; the MDF version has a different surface appearance.
SKU references in the size table identify the plywood versions. The matching MDF version uses the same SKU with an -MDF suffix.
Designed for your camper layout
- Two top-hinged doors with rounded corners and a centre divider
- 18 mm Plywood or MDF, according to your selection
- 6.35 mm clearance around each door
- Open back and top for integration into your camper layout
- Supplied flat packed with all assembly hardware, including soft-close hinges, and an illustrated build guide
Choose your size
Select your width above. Every locker is 250 mm deep and 250 mm high. All dimensions are overall outside measurements.
| Width x depth x height | Item SKU |
|---|---|
| 500 x 250 x 250 mm | CP-0020 |
| 600 x 250 x 250 mm | CP-0021 |
| 700 x 250 x 250 mm | CP-0022 |
| 800 x 250 x 250 mm | CP-0023 |
| 900 x 250 x 250 mm | CP-0024 |
| 1000 x 250 x 250 mm | CP-0025 |
| 1100 x 250 x 250 mm | CP-0026 |
| 1200 x 250 x 250 mm | CP-0027 |
Material and delivery
Material: Plywood or MDF, as selected. Thickness: 18 mm. Delivery: flat pack - assembly required.
What comes in the kit?
Seven CNC-cut parts in your selected material: two sides, a base, front frame, centre divider and two doors. Assembly brackets, four soft-close hinges with mounting plates, two door catches with matching strike plates, assembly screws, threaded inserts and an illustrated build guide are included. Tools and finishing consumables are separate. Wall/ceiling fixing hardware is available with the optional fitting kit.
Plan your installation
Check the dimensions against your available space before ordering. Secure the assembled unit to suitable structural mounting points and secure contents for travel. The back and top remain open.
Images are 3D product renders. Select a size to see its matching main image; additional views show the design in the sizes stated in their captions. Wood grain varies. Assembly fittings are included but are not depicted in the renders.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.