CONTOUR LWB Compact Case + Bin Rack — Offside — Natural plywood fixed shelving - three-quarter view — Revision D

Ford Transit Custom MK1 LWB Compact Case + Bin Rack - Offside | CONTOUR

£319.99

Keep tool cases on their own trays and fittings, consumables and smaller tools in divided shelves. This CONTOUR combination gives each type of kit its own place, so everyday equipment is easier to find and reach.

Built for an organised working van

45 divided plywood storage compartments for small tools, fittings and consumables.
5 separate fixed case trays; check your cases against the shelf dimensions below.
12 mm plywood with exposed layered edges: choose unfinished natural plywood or black hex phenolic plywood.
Fixed shelves and mortice-and-tenon joints; shaped bin dividers follow the shelf profile. The lower front support rails also slot into the side panels.
Bin shelves have front and rear retaining lips. Tool-case trays have an open front and a rear lip only. Full-height end panels and an open back.
The 400 mm-deep case section projects 100 mm forward of the 300 mm-deep bin shelving, with the backs aligned.
Case trays have an 8-degree rearward slope.
Supplied flat pack with 3.5 x 30 mm assembly screws and illustrated instructions.

Dimensions and layout

Overall width x depth x height: 2375 x 400 x 1150 mm
Material: 12 mm plywood — natural unfinished or black hex phenolic.
Vehicle layout: Ford Transit Custom MK1 panel van LWB / L2, first-generation body (2013-2023).
Position: Offside / right-hand side (UK driver side).
Product code: VS-0040.
Included layout: 3 adjoining modules as pictured.

Module order below is left to right when looking at the front of the assembled rack.

Module	Storage	Width x depth	Tiers
M1	Case trays	500 x 400 mm	5
M2	Divided shelves	875 x 300 mm	3
M3	Divided shelves	1000 x 300 mm	3

Usable shelf dimensions

Tiers are numbered from bottom to top. Width is per divided compartment or per case tray; depth is the usable shelf floor between the bin lips, or from the open case-tray front to its rear lip. The wall contour means shelf depths vary by tier.

Module	Tier	Compartments	Clear width	Floor depth
M1	1	1	476 mm	371.7 mm
M1	2	1	476 mm	250.5 mm
M1	3	1	476 mm	250.5 mm
M1	4	1	476 mm	330 mm
M1	5	1	476 mm	296.6 mm
M2	1	7	111.2 mm	263 mm
M2	2	7	111.2 mm	143 mm
M2	3	7	111.2 mm	180.7 mm
M3	1	8	111.5 mm	263 mm
M3	2	8	111.5 mm	143 mm
M3	3	8	111.5 mm	180.7 mm

For case storage, compare the complete case dimensions, including handles and latches, with the matching build sheet. Case trays have no front lip, so each case can slide out independently.

Fitting your van

Minor trimming may be required to suit your van's ply lining, wheel-arch boxing, floor build-up, carpet or other interior finishes. Check the overall size, wheel-arch clearance, bulkhead position and door openings against your own van before ordering. The shaped profile is based on our first-generation Transit Custom contour; lining thickness and individual conversions can change the fit. This range is for the MK1 body, not the new-shape MK2.

Dry-fit the panels before final assembly. Pre-drill screw holes with a 2 mm drill bit, then assemble using the supplied 3.5 x 30 mm screws. Secure the finished racking to suitable vehicle fixing points; vehicle mounting fixings are selected separately for your installation.

What's included

The CNC-cut plywood panels for the complete pictured layout, the required assembly and adjoining-module screws, and the customer assembly guide with the matching build sheet. Supplied flat pack for self-assembly. Tools, tool cases, loose contents, additional finishing products and vehicle mounting fixings are not included. Product images are renders of this layout; natural plywood grain and supplier hex emboss may vary.

Choose your material

Natural plywood: an unfinished wood surface with exposed laminated edges.

Black hex phenolic plywood: a black hex-patterned exterior, smooth black shelf surfaces and inward-facing carcass panels, and exposed natural plywood edges. The board has one hex face and one smooth reverse; internal dividers show one of each. Both options use 12 mm stock and are supplied flat pack.

This layout has 3 bays. Black hex adds £150 to the natural-plywood price (£50 per bay). A bay is one adjoining rack section, not an individual shelf compartment. The material selector shows the complete price for your chosen finish.