GRID Aerosol Can Holder - 5-Can Plywood Storage Rack

Keep five spray cans neatly separated and easy to reach. The raised locating panel supports an organised row of cans above a solid base, with shaped plywood sides for a clean workshop finish.

Your storage space

• 5 circular 70 mm openings above a supporting base.
• Overall: 521 mm wide x 150 mm deep x 116 mm high.
• 12 mm natural plywood, unfinished, with exposed layered edges.
• Fixed slotted joints, supporting base and an open back beneath a narrow upper mounting rail.

Check the widest part of each can, including cap and base rim, fits with clearance through the 70 mm openings. Allow space above to lower cans in and lift them fully out. Cans are not included; follow their storage instructions.

Two-hole screw mounting

Two 4 mm through-holes in the upper rear rail, 427 mm centre to centre and 20 mm below the unit top, let you attach the unit to a suitable plywood or timber support. There are no hanging hooks. Fit the bare rail first for clear screwdriver access, then assemble the body around it.

Pair it with our plain plywood tool board, mounted securely with clearance behind it. The 3.5 x 30 mm mounting screws pass through the 12 mm rail and extend 18 mm into or through the support. Through a 12 mm board, allow approximately 6 mm behind it for the screw tips. The mounting board and its structural fixings are separate.

Supplied flat pack

Includes 6 CNC-cut panels, 18 assembly screws and two mounting screws, all 3.5 x 30 mm, plus an illustrated guide. Clamp joints square and pre-drill receiving edges with a 2 mm bit before fitting screws. Pre-drill the timber mounting support with a 2 mm bit too. Contents and tools are not included. Keep contents secured for travel.

Images are renders of the current cutting model; natural wood grain and colour vary.

Downloads

Revision B build and fitting guide (PDF) · Revision B packing checklist (PDF)