CONTOUR Side-Door Bin Rack — Nearside — Natural plywood fixed shelving - three-quarter view — Revision D

Ford Transit Custom MK1 Side-Door Bin Rack - Nearside | CONTOUR

£149.99

Keep everyday essentials close to the side-door access point. Four tiers of divided shelving provide an organised home for screws, fittings, consumables and hand tools.

Built for an organised working van

32 divided plywood storage compartments for small tools, fittings and consumables.
12 mm plywood with exposed layered edges: choose unfinished natural plywood or black hex phenolic plywood.
Fixed shelves and mortice-and-tenon joints; shaped bin dividers follow the shelf profile. The lower front support rails also slot into the side panels.
Bin shelves have front and rear retaining lips. Tool-case trays have an open front and a rear lip only. Full-height end panels and an open back.
Supplied flat pack with 3.5 x 30 mm assembly screws and illustrated instructions.

Dimensions and layout

Overall width x depth x height: 1000 x 300 x 1150 mm
Material: 12 mm plywood — natural unfinished or black hex phenolic.
Vehicle layout: Ford Transit Custom MK1; check the stated dimensions and intended mounting position, first-generation body (2013-2023).
Position: Nearside / left-hand side (UK passenger side).
Product code: VS-0048.
Included layout: 1 module as pictured.

Module order below is left to right when looking at the front of the assembled rack.

Module	Storage	Width x depth	Tiers
M1	Divided shelves	1000 x 300 mm	4

Usable shelf dimensions

Tiers are numbered from bottom to top. Width is per divided compartment or per case tray; depth is the usable shelf floor between the bin lips, or from the open case-tray front to its rear lip. The wall contour means shelf depths vary by tier.

Module	Tier	Compartments	Clear width	Floor depth
M1	1	8	111.5 mm	263 mm
M1	2	8	111.5 mm	143 mm
M1	3	8	111.5 mm	229.9 mm
M1	4	8	111.5 mm	180.7 mm

For case storage, compare the complete case dimensions, including handles and latches, with the matching build sheet. Case trays have no front lip, so each case can slide out independently.

Fitting your van

Minor trimming may be required to suit your van's ply lining, wheel-arch boxing, floor build-up, carpet or other interior finishes. Check the overall size, wheel-arch clearance, bulkhead position and door openings against your own van before ordering. The shaped profile is based on our first-generation Transit Custom contour; lining thickness and individual conversions can change the fit. This range is for the MK1 body, not the new-shape MK2.

Dry-fit the panels before final assembly. Pre-drill screw holes with a 2 mm drill bit, then assemble using the supplied 3.5 x 30 mm screws. Secure the finished racking to suitable vehicle fixing points; vehicle mounting fixings are selected separately for your installation.

What's included

The CNC-cut plywood panels for the complete pictured layout, the required assembly and adjoining-module screws, and the customer assembly guide with the matching build sheet. Supplied flat pack for self-assembly. Tools, tool cases, loose contents, additional finishing products and vehicle mounting fixings are not included. Product images are renders of this layout; natural plywood grain and supplier hex emboss may vary.

Choose your material

Natural plywood: an unfinished wood surface with exposed laminated edges.

Black hex phenolic plywood: a black hex-patterned exterior, smooth black shelf surfaces and inward-facing carcass panels, and exposed natural plywood edges. The board has one hex face and one smooth reverse; internal dividers show one of each. Both options use 12 mm stock and are supplied flat pack.

This layout has 1 bay. Black hex adds £50 to the natural-plywood price (£50 per bay). A bay is one adjoining rack section, not an individual shelf compartment. The material selector shows the complete price for your chosen finish.