CORNER L Campervan Lounge & Sliding Bed
See it full-size with your phone camera.
CORNER L Campervan Lounge & Sliding Bed
Build an L-shaped lounge around an attached sliding bed deck. A rear bench provides extra seating and open storage while the main deck extends for sleeping at camp.
Made in the UK by 888CamperWorks, supplied as an unfinished plywood flat-pack kit for assembly.
Dimensions and construction
- Closed overall dimensions (W × D × H): 1200 × 2300 × 440 mm.
- Material: 18 mm plywood.
- Finish: natural plywood, supplied unfinished.
What is included?
- 43 CNC-cut plywood panels for the complete pictured furniture layout.
- Assembly brackets, matching screws and threaded inserts.
- Illustrated assembly and packing guide (PDF).
Sliding bed and installation
The bed uses an attached plywood comb deck, retained guides and a removable position key. Move the unloaded deck evenly and secure it in the closed or extended position as shown in the assembly guide. Allow room for the complete movement when planning your interior.
Cushions and mattresses are separate. This furniture is for use when parked; it is not a travelling passenger seat or a seat-belt mounting. No tested load rating is stated. Each module needs structural restraints suited to the actual vehicle.
Plan your fit
Measure your finished van interior, wheel arches, access openings and remaining walkways before ordering. These are generic square-backed furniture dimensions; no named-vehicle fit is claimed. Follow the guide and choose suitable structural mounting points. Secure the furniture and loose contents for travel.
Vehicle-specific restraints, appliances, cushions, plumbing, electrical equipment, tools and finishing products are separate. Seal plywood faces and exposed edges before use. Images are CAD renders of this design; wood grain varies and some views omit doors or hardware to show the construction.
Download the assembly and packing guide (PDF)
Delivery is calculated at checkout under our shipping policy. Browse all campervan furniture.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.