Everything You Need To Fit Van Racking Bundle
£19.99
Skip to product information
Everything You Need To Fit Van Racking Bundle
£19.99
The cheaper complete fitting bundle for your van racking install.
Includes the three common accessories customers need when assembling and fitting plywood van shelving.
- Van racking fitting kit with angle brackets, floor brackets and fixing screws
- 2mm drill bit for pre-drilling pilot holes
- PVA glue for bonding plywood joints during assembly
Buying the bundle is cheaper than adding the three items individually.
Fit check Make sure it fits before you order Guide
Product Check the listed dimensions
Vehicle Measure your clear load-space area
Clearance Allow for doors, arches and trim
Fitting Secure with suitable fixings
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.
Unsure on sizing?
Send your van make/model and rough internal measurements before ordering. We will point you at the best fit.
Ask before ordering