Ford Transit Connect Mk3 2022 onwards SWB/LWB Van Racking Shelving Unit - 1000mm x 1000mm x 300mm
Ford Transit Connect Mk3 2022 onwards SWB/LWB Van Racking Shelving Unit - 1000mm x 1000mm x 300mm
A plywood side racking shelf for Ford Transit Connect Mk3 2022 onwards SWB and LWB vans. The open shelf layout gives practical storage for tools, fixings, boxes and everyday trade kit while keeping the van load area usable.
Fitment
- Vehicle: Ford Transit Connect
- Mark: Mk3
- Years: 2022 onwards
- Wheelbase: SWB and LWB where the available side-wall space matches the unit dimensions
- Position: side-wall racking
Key features
- Plywood van racking shelf for Ford Transit Connect vans
- Open-front shelves for quick access to tools and consumables
- Flat packed for transport and assembly
- Useful for electricians, plumbers, builders, installers and mobile trades
- Can be paired with a fitting kit, drill bit and PVA glue during installation
Dimensions
- Height: 1000mm
- Width: 1000mm
- Depth: 300mm
Assembly notes
Dry-fit the panels first, pre-drill fixing holes and use PVA wood glue on the joints during assembly. Secure the finished racking to the van using a suitable fixing method for your vehicle, lining and load use.
Please check before ordering: measure your van and check wheel arch position, side lining, bulkhead, tie-down points and any existing fitted equipment. Vehicle names are used for fitment guidance only.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.
888VanRacking is not affiliated with Ford. Vehicle names are used for fitment guidance only.