MODLINE KIT 520 Accessory End Panel
MODLINE KIT 520 Accessory End Panel
Four compact holders turn an exposed rack end into storage for drills, sealant guns, a cable reel and PPE. Divided upper holders, raised lips keep the arrangement adaptable.
- Four holder groups for suitable drills, sealant guns, cable reels and PPE; 140 mm projection from the host.
- 520 x 140 x 726 mm nominal module dimensions
- 12 mm natural birch plywood
- Open-backed design
- Sold individually and supplied flat packed
Clear storage dimensions
| PPE tray | width: 318; depth: 116; height: 64 |
|---|---|
| Cable reel cradle | width: 318; depth: 116; height: 64 |
| Sealant gun holder | width: 98; depth: 116; height: 64 |
| Drill cradle | width: 98; depth: 116; height: 64 |
Dimensions and material
| Width | 520 mm |
|---|---|
| Depth | 140 mm |
| Height | 726 mm |
| Material | Birch plywood |
| Material thickness | 12 mm |
| Appearance | Natural wood |
| Delivery format | Flat pack - assembly required |
| Product SKU | VS-0020 |
What is included
Pre-cut plywood parts, assembly screws and an illustrated build guide are included. Assemble with the supplied 3.5 x 30 mm screws and pre-drill the mating fixing holes with a 2 mm bit as shown in the guide. Secure the finished unit to suitable structural mounting points using installation fittings selected for your vehicle. Tools and vehicle mounting fittings are separate.
Module compatibility
Fits the exposed rear end of the SORT module on the short MODLINE run. SORT is sold separately. Receiving pads are included and sit inside the host. Check your tools against the published holder dimensions.
The MODLINE layout is designed around a Transit Custom Mk1 L1. Check module dimensions, wheel-arch clearance, wall lining and door access against your own van. Each listing supplies the pictured module only; vehicle installation fittings, tools and stored contents are separate.
Product images are 3D renders of the natural plywood design. Grain and colour vary between sheets. Store contents securely for travel.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.