MODLINE ARCH 550 Wheel-Arch Foundation
MODLINE ARCH 550 Wheel-Arch Foundation
A wheel-arch bridge with two useful front pockets and replaceable screw-receiving strips. Its open rear relief clears a 260 mm projection and 380 mm height without relying on a close-fitting guessed arch curve.
- Wheel-arch foundation with two front pockets; supports one 550 mm MODLINE upper module.
- 550 x 520 x 424 mm nominal module dimensions
- 12 mm natural birch plywood
- Open-backed design
- Sold individually and supplied flat packed
Clear storage dimensions
| Front pockets, each | width: 257; depth: 212; height: 240 |
|---|---|
| Rear arch clearance | width: 526; depth: 260; height: 380 |
Dimensions and material
| Width | 550 mm |
|---|---|
| Depth | 520 mm |
| Height | 424 mm |
| Material | Birch plywood |
| Material thickness | 12 mm |
| Appearance | Natural wood |
| Delivery format | Flat pack - assembly required |
| Product SKU | VS-0012 |
What is included
Pre-cut plywood parts, assembly screws and an illustrated build guide are included. Assemble with the supplied 3.5 x 30 mm screws and pre-drill the mating fixing holes with a 2 mm bit as shown in the guide. Secure the finished unit to suitable structural mounting points using installation fittings selected for your vehicle. Tools and vehicle mounting fittings are separate.
Module compatibility
ARCH is a foundation, not an upper shelf unit. Its rear relief is 526 mm wide, 260 mm deep and 380 mm high per base. Adjacent bases may bridge a longer wheel arch. Measure your arch and lining before ordering; upper modules are sold separately.
The MODLINE layout is designed around a Transit Custom Mk1 L1. Check module dimensions, wheel-arch clearance, wall lining and door access against your own van. Each listing supplies the pictured module only; vehicle installation fittings, tools and stored contents are separate.
Product images are 3D renders of the natural plywood design. Grain and colour vary between sheets. Store contents securely for travel.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.