MODLINE SORT 550 Small-Parts Organiser
MODLINE SORT 550 Small-Parts Organiser
Twelve labelled compartments across three removable trays organise screws, fittings and consumables. Dividers and raised fronts keep the layout easy to see.
- Twelve labelled compartments across three removable trays for screws, fittings and small consumables.
- 550 x 520 x 726 mm nominal module dimensions
- 12 mm natural birch plywood
- Open-backed design
- Sold individually and supplied flat packed
Clear storage dimensions
| Labelled parts tray 55 | minimum compartment width: 119; outer compartment width: 125; depth: 342; deck height: 67; front lip height: 70 |
|---|---|
| Labelled parts tray 245 | minimum compartment width: 119; outer compartment width: 125; depth: 342; deck height: 257; front lip height: 70 |
| Labelled parts tray 435 | minimum compartment width: 119; outer compartment width: 125; depth: 342; deck height: 447; front lip height: 70 |
Dimensions and material
| Width | 550 mm |
|---|---|
| Depth | 520 mm |
| Height | 726 mm |
| Material | Birch plywood |
| Material thickness | 12 mm |
| Appearance | Natural wood |
| Delivery format | Flat pack - assembly required |
| Product SKU | VS-0016 |
What is included
Pre-cut plywood parts, assembly screws and an illustrated build guide are included. Assemble with the supplied 3.5 x 30 mm screws and pre-drill the mating fixing holes with a 2 mm bit as shown in the guide. Secure the finished unit to suitable structural mounting points using installation fittings selected for your vehicle. Tools and vehicle mounting fittings are separate.
Module compatibility
Fits one ARCH 550 foundation, sold separately. FLEX, CASE, DRAW, SORT and REACH share the same four-screw base interface and can be exchanged by unscrewing and refitting. This upper module is 726 mm high; an ARCH-plus-upper stack is 1150 mm high.
The MODLINE layout is designed around a Transit Custom Mk1 L1. Check module dimensions, wheel-arch clearance, wall lining and door access against your own van. Each listing supplies the pictured module only; vehicle installation fittings, tools and stored contents are separate.
Product images are 3D renders of the natural plywood design. Grain and colour vary between sheets. Store contents securely for travel.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.