MODLINE CASE 550 Independent Tool-Case Rack
MODLINE CASE 550 Independent Tool-Case Rack
Four individual case spaces let you take out one toolbox without unstacking the rest. Choose cases using the published clear width, depth and removal height.
- Four separate tool-case spaces; shelf levels can be changed without stacking cases.
- 550 x 520 x 726 mm nominal module dimensions
- 12 mm natural birch plywood
- Open-backed design
- Sold individually and supplied flat packed
Clear storage dimensions
| Case slot 45 | width: 524; depth: 342; deck height: 57; front lip height: 35 |
|---|---|
| Case slot 195 | width: 524; depth: 342; deck height: 207; front lip height: 35 |
| Case slot 345 | width: 524; depth: 342; deck height: 357; front lip height: 35 |
| Case slot 495 | width: 524; depth: 342; deck height: 507; front lip height: 35 |
At the starting shelf levels, the first three slots allow a 103 mm case removal height above the front lip; the upper slot allows 172 mm. Each tray has a clear 524 x 342 mm area. Lift the case over the lip. Changing shelf levels changes the removal heights; choose cases by their outside dimensions.
Dimensions and material
| Width | 550 mm |
|---|---|
| Depth | 520 mm |
| Height | 726 mm |
| Material | Birch plywood |
| Material thickness | 12 mm |
| Appearance | Natural wood |
| Delivery format | Flat pack - assembly required |
| Product SKU | VS-0014 |
What is included
Pre-cut plywood parts, assembly screws and an illustrated build guide are included. Assemble with the supplied 3.5 x 30 mm screws and pre-drill the mating fixing holes with a 2 mm bit as shown in the guide. Secure the finished unit to suitable structural mounting points using installation fittings selected for your vehicle. Tools and vehicle mounting fittings are separate.
Module compatibility
Fits one ARCH 550 foundation, sold separately. FLEX, CASE, DRAW, SORT and REACH share the same four-screw base interface and can be exchanged by unscrewing and refitting. This upper module is 726 mm high; an ARCH-plus-upper stack is 1150 mm high.
The MODLINE layout is designed around a Transit Custom Mk1 L1. Check module dimensions, wheel-arch clearance, wall lining and door access against your own van. Each listing supplies the pictured module only; vehicle installation fittings, tools and stored contents are separate.
Product images are 3D renders of the natural plywood design. Grain and colour vary between sheets. Store contents securely for travel.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.