Plain Plywood Tool Board - 1180 x 475 mm
Plain Plywood Tool Board - 1180 x 475 mm
A clean canvas for your workshop or van setup. This solid natural-plywood board gives you a simple, uninterrupted face, with softly rounded upper corners and exposed layered edges.
Simple, solid and ready for your layout
- 1180 mm wide x 475 mm high x 12 mm thick.
- Natural plywood with an unfinished wood surface.
- Two upper corners rounded to a 20 mm radius; square lower corners.
- Plain faces with no peg apertures, mounting holes or slots.
- One CNC-cut panel, supplied flat. No panel assembly needed.
Make it your own
Position your own suitable holders where they work best, with attachments selected for the chosen accessories and supporting structure. This standalone board shares the outline of our workbench tool board, without the pegboard openings. Slot-in GRID pegboard accessories do not fit the solid face.
What is included
One solid plywood panel and a fitting and care guide. Workbench, mounting fixings, hooks, holders and tools are separate. The board needs independent attachment to suitable structural mounting points; there are no pre-drilled mounting locations.
Images are renders of the cutting model. Natural wood grain and colour vary.
Downloads
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.