ROAM Campervan Tabletop - 600 x 400mm Plywood or MDF
ROAM Campervan Tabletop - 600 x 400mm Plywood or MDF
Make room for meals, a laptop or everyday campervan essentials with a simple tabletop in your choice of birch plywood or MDF. Four rounded corners give this compact surface a clean shape.
Optional fitting kit - £9.99
Add a fitting kit using the Fitting kit option above. The kit includes L brackets and screws to fix your furniture to your campervan wall or ceiling. Select With fitting kit (+£9.99) to add one kit to the selected furniture variant, or Without fitting kit to buy the furniture at its original price.
Use fixing points suitable for the furniture load and check that the supplied fixings suit your van’s wall or ceiling construction.
Choose your material
Select Plywood or MDF using the Material option. Both materials cost the same for the selected size. Product images show the plywood version; the MDF version has a different surface appearance.
- 600 x 400 x 15 mm overall
- 15 mm birch plywood or MDF, as selected
- Four 30 mm radius corners
- Plain upper face and underside
- Tabletop only, supplied as one flat panel
Dimensions and material
| Width | 600 mm |
|---|---|
| Depth | 400 mm |
| Thickness | 15 mm |
| Material | Birch plywood or MDF, as selected |
| Material thickness | 15 mm |
| Appearance | Depends on the selected material; images show plywood |
| Delivery format | Single flat panel |
| Product SKU | CP-0030 |
What is included
Your pack contains one tabletop, identification label and installation and care guide. Legs, rails and pedestals are separate. Wall/ceiling fixing hardware is included only when you select the optional fitting kit. There is no pre-drilled mounting pattern; choose a support suitable for the tabletop size and 15 mm material.
Check seating and walkway clearances before installation. Fit using the support manufacturer’s instructions. Apply a suitable wood finish if a sealed surface is wanted.
Product images are 3D renders showing the plywood option. Plywood grain and colour vary between sheets; MDF has a different appearance.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.