Universal Van Rack - 1000W x 1100H mm Plywood Flat Pack
Universal Van Rack - 1000W x 1100H mm Plywood Flat Pack
Give tools, fixings and everyday supplies an organised place in your van. Three accessible shelves with raised front and rear retaining lips make the most of a slim 300 mm depth.
- 1000 x 300 x 1100 mm overall, width x depth x height
- Three shelves with retaining lips
- 12 mm natural plywood
- Open back and lower front rail
- Twelve pre-cut panels, supplied flat packed
Dimensions and material
| Width | 1000 mm |
|---|---|
| Depth | 300 mm |
| Height | 1100 mm |
| Material | Plywood |
| Material thickness | 12 mm |
| Appearance | Natural wood |
| Delivery format | Flat pack - assembly required |
| Product SKU | VS-0006 |
What is included
Pre-cut plywood parts, assembly screws and an illustrated build guide are included. Assemble with the supplied 3.5 x 30 mm screws and pre-drill the mating fixing holes with a 2 mm bit as shown in the guide. Secure the finished unit to suitable structural mounting points using installation fittings selected for your vehicle. Tools and vehicle mounting fittings are separate.
Choose the width and height to suit your available space. Universal describes the layout: measure your van, wheel arches and lining before ordering. Vehicle installation fittings and stored contents are separate.
Product images are 3D renders of the natural plywood design. Grain and colour vary between sheets. Store contents securely for travel.
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.