Van Workbench with Tool Board - 1180mm Plywood Flat Pack
Van Workbench with Tool Board - 1180mm Plywood Flat Pack
Create a practical work area in your van with a broad worktop, open storage below and a perforated tool board above. The compact plywood construction gives everyday kit a place close to hand.
- 1180 mm wide x 512 mm deep
- 852 mm worktop height; 1327 mm total height including the tool board
- 12 mm natural plywood
- Open-backed storage beneath the worktop
- Perforated tool board included
- Slotted worktop with four locating tabs and a 50 mm-high centre support beneath the top
- Open leg space, with no middle leg
- Tabbed lower front support locates in matching slots in both side panels
Dimensions and material
| Width | 1180 mm |
|---|---|
| Depth | 512 mm |
| Height | 1327 mm |
| Material | Plywood |
| Material thickness | 12 mm |
| Appearance | Natural wood |
| Delivery format | Flat pack - assembly required |
| Product SKU | VS-0002 |
What is included
Eleven pre-cut plywood parts, 44 assembly screws and an illustrated build guide are included. The shallow front-to-back brace slots into the upper front and rear rails; the worktop lowers onto four side-panel locating tabs. The lower front support slots into both sides before the second side is fitted, then secures with four screws driven through the sides. Assemble with the supplied 3.5 x 30 mm screws and pre-drill the mating fixing holes with a 2 mm bit as shown in the guide. Secure the finished unit to suitable structural mounting points using installation fittings selected for your vehicle. Tools and vehicle mounting fittings are separate.
The tool board requires separate structural wall or vehicle mounting. Tool hooks, mounting hardware and tools are not included.
Product images are 3D renders of the natural plywood design. Grain and colour vary between sheets. Store contents securely for travel.
Downloads
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.