Locking runners, full extension
Pull the drawer out to reach equipment at the back. Each drawer has its own pair of locking ball-bearing runners, with yellow release catches.
888 VAN RACKING · MADE TO MEASURE
Citroën Berlingo
storage drawers.
Give smaller tools a dedicated pull-out space in your Citroën Berlingo. Start with your finished load-area measurements, choose the drawer size and compare ply and Black Hex prices instantly.
From £257.40including VAT
Delivered fully assembled · £80 UK pallet delivery
Made to order in 1–2 weeks · allow 2 weeks for delivery
18mm natural ply18mm Black Hex
Example Black Hex unit shown. Your dimensions and drawer layout are made to order.
600–1200mmChoose your width & depth
180–600mmChoose your overall height
10mm stepsSize it around your space
1 or 2 drawersFull width or side by side
Made to your measurements for your Citroën Berlingo. Confirm the year, body length and finished load area. Model selection does not set the drawer dimensions or guarantee fit. Read the Citroën Berlingo layout guide.
MADE FOR YOUR SETUP
Configure your drawer
Choose a finish and layout, enter your measurements, then see your price including VAT. All sizes are the outside dimensions of the closed unit.
YOUR DRAWER / LIVE PREVIEWBlack Hex
Illustrative preview · external dimensions
WIDTH800 mm
LENGTH1000 mm
HEIGHT300 mm
Measure the space, not just your van. Allow for wheel arches, lining, door openings and room to pull the drawer out. See the measuring guide
TAKE A CLOSER LOOK
The details that make your drawer.
From the plywood joints to the locking runners, explore the construction of our Black Hex drawer. Choose the size and layout around your own tools and equipment.
18mm plywood construction
See the layered plywood edges and interlocking joints up close. Choose natural plywood or the dark textured Black Hex finish shown here.
Space for the kit you carry
One removable internal divider is included in each drawer. Add up to two extra dividers per drawer at £17.50 each to organise your equipment.
BUILT BEFORE IT REACHES YOU
Delivered fully assembled.
Your complete drawer unit arrives on a pallet. Choose one full-width drawer or two equal-width drawers side by side, then plan the installation in your van.
£80 UK pallet delivery
Lead time: 1–2 weeks. Please allow 2 weeks for delivery. Vehicle installation is separate.
CHOOSE YOUR BUILD
Van drawer sizes and specifications
Enter the outside dimensions of the complete closed unit. Width is side to side; length, also called depth, is front to back. Allow for the housing, runners and panels when planning what will fit inside.
These are custom-size units, so fit depends on your measurements. Check your own van, including any lining, wheel-arch boxes and existing racking.
- Width
- 600–1200mm
- Length / depth
- 600–1200mm
- Height
- 180–600mm
- Size increments
- 10mm
- Construction
- 18mm natural ply or Black Hex plywood
- Drawer layout
- 1 full-width drawer or 2 side-by-side drawers with a fixed centre partition
- Dividers
- 1 internal divider per drawer; up to 2 extras per drawer at £17.50 each
- Runners
- One locking, full-extension ball-bearing pair per drawer
- Runner rating
- Up to 225kg depending on length, including the drawer’s own weight
- Supply & lead time
- Fully assembled; 1–2 week lead time
- UK delivery
- £80 per drawer order
TWO FINISHES
Natural plywood or Black Hex?
Both options use 18mm plywood and the same dimension range. Choose the appearance that suits your van; the configurator shows the price for each finish.
Natural ply drawers
A light wood appearance with the plywood grain visible. Natural ply is the lower-priced option, starting at £257.40 for a 600 × 600 × 180mm drawer.
Black Hex drawers
A dark hex-pattern finish with exposed plywood edges. Black Hex starts at £282.40 for the same size, with one divider included.
PLAN YOUR BUDGET
Custom van drawer prices
These single-drawer example sizes include one internal divider and the runners. You can choose sizes in 10mm increments within the allowed range; the examples are starting points, not the only sizes available.
| Drawer size | Natural ply | Black Hex |
|---|---|---|
| 600 × 600 × 180mm | £257.40 | £282.40 |
| 800 × 1000 × 300mm | £345.00 | £370.00 |
| 1200 × 1200 × 600mm | £657.00 | £682.00 |
Extra internal dividers cost £17.50 each, up to two extras per drawer. A two-drawer layout adds £200 at 600–800mm depth, £250 at 810–1000mm or £300 at 1010–1200mm. The upgrade includes the fixed centre partition and one internal divider in each drawer. For example, the 800 × 1000 × 300mm Black Hex drawer is £370.00, or £450.00 with delivery before adding extra dividers.
PLAN YOUR CITROËN BERLINGO
Choose the smallest useful footprint for your equipment
Check whether your Berlingo is the M or XL version where those designations apply, and whether it is a van or passenger configuration. Measure the usable space in the configuration you drive, including any seats and fitted trim.
In a compact van, it helps to lay out the tools you intend to store before allocating floor space. Decide what needs a drawer and what must remain easy to load beside it. Compare your measured bay with the minimum external width and length of 600mm. If the bay is narrower or shorter, this configurator cannot produce a suitable unit: contact us before placing an order.
-
Minimum size
Confirm a 600 × 600mm or larger closed footprint is available with room to open.
-
Rear-door arrangement
Measure the clear route through the doors and past their trim, not only the floor width.
-
Tool-case space
Ask us to check internal clearance if a particular case must fit inside.
Can I order a drawer narrower than 600mm for a Berlingo?
The online configurator starts at 600mm for both external width and length. Do not order an oversized unit hoping to trim it down. Contact us with the actual space if it falls outside the available range.
For vehicle identification, see Citroën Berlingo manufacturer information. Check the handbook for your model year and measure your own finished load area before ordering.
GET THE FIT RIGHT
How to measure for a van storage drawer
Measure your finished load area with any flooring, lining and existing storage already in place.
- 01
Measure the closed unit’s space
Width runs side to side. Length runs front to back. Height runs from the floor to the top of the outer housing.
- 02
Check the way in and out
Check the door opening and surrounding fittings. Leave clear space in front of the unit for the drawer to pull out.
- 03
Think about what goes inside
External dimensions are larger than usable drawer space. If a particular tool case needs to fit, check its size with us before ordering.
BEFORE YOU ORDER
Custom van drawer questions
How much does a custom van storage drawer cost?
Prices start at £257.40 including VAT for a 600 × 600 × 180mm natural ply drawer with one divider. The same size in Black Hex costs £282.40. Extra dividers are £17.50 each, and UK pallet delivery is £80. Use the configurator for the exact price of your chosen size.
Can I choose two drawers?
Yes. Choose one full-width drawer or two equal-width drawers side by side in one housing. The two-drawer layout includes a fixed 18mm centre partition, two handles and a separate pair of locking runners for each drawer. The upgrade is £200 at 600–800mm depth, £250 at 810–1000mm and £300 at 1010–1200mm, including VAT. Overall unit dimensions stay the same; usable drawer width is smaller than half the external width.
What sizes can I choose?
Width and length can each be between 600mm and 1200mm. Height can be between 180mm and 600mm. Choose your dimensions in 10mm increments.
Are these internal or external measurements?
The dimensions describe the outside of the complete closed unit. The drawer’s usable inside space is smaller because of its panels and runners. Contact us if you need to fit an item with specific dimensions.
How many dividers are included?
Each drawer includes one removable internal divider. Add up to two extras per drawer at £17.50 each. The two-drawer layout also includes a fixed 18mm centre partition; this is separate from the internal dividers.
What are the material options?
Choose 18mm natural plywood or 18mm Black Hex plywood. The preview changes with your selected finish and dimensions; it is an illustration rather than a manufacturing drawing.
Which runners are included?
One pair of heavy-duty locking, full-extension ball-bearing runners per drawer, rated up to 225kg per pair depending on runner length. The runner rating includes the drawer’s own weight, so it is not the usable payload. Contact us before ordering if you need to carry a particular load.
How is it supplied and delivered?
Your drawer is delivered fully assembled on a pallet. Lead time is 1–2 weeks, with £80 UK pallet delivery. Please allow 2 weeks for delivery.
Can I use it beneath a van floor or campervan bed?
Measure the clear space beneath your planned floor or bed, including access for the drawer to open. Choose a height from 180mm to 600mm. This listing supplies the drawer unit; it does not include a raised floor or bed system. Ask us about your layout before ordering if you need advice.
Will this fit my van?
This is a made-to-measure unit, so fit depends on the space available in your van. Check the finished load area, wheel arches, door opening and drawer clearance. Contact us with your measurements if you need help.