Ford Transit 2014 Onwards L1/L2 H2 Van Racking - Triple Unit
Ford Transit 2014 Onwards L1/L2 H2 Van Racking - Triple Unit
A full triple bay plywood van racking setup for the full-size Ford Transit L1/L2 H2, suitable for 2014 onwards vans including current 2024 models. This is for the larger Ford Transit van, not the Transit Custom.
The three-bay layout gives practical side-wall storage for trade tools, fixings, boxes, sealants and daily consumables while keeping the load area organised and easy to work from.
Supplied flat-packed for simple DIY assembly. For best results, dry fit before fixing, pre-drill all holes and glue the joints during assembly with PVA wood glue. Secure the finished racking to the van using a suitable fixing method for your vehicle and load use.
Vehicle fitment
- Ford Transit full-size van
- 2014 onwards / current generation
- L1 and L2 body lengths
- H2 roof height
- Includes 2024 Ford Transit models
Dimensions
- Each bay: 1100mm high x 1000mm wide x 380mm deep
- Triple setup: three matching bay sections
Good for
- Trade tools and daily equipment
- Fixing boxes, parts bins and consumables
- Organising the side wall of a full-size Transit
UK made by 888VanRacking. Questions before ordering? Call 07917 585 156.
W 1000 x H 1100 x D 380mm per bay
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.
888VanRacking is not affiliated with Ford. Vehicle names are used for fitment guidance only.