GRID Storage Box - Compact Plywood Workshop Organiser

Give the small things a home with GRID. Curved side lips, exposed plywood edges and a low front make everyday essentials easy to see and reach.

Your storage space

• Body 206 W x 100 D x 56 H mm, with sculpted side lips and a low front retaining lip.
• Overall: 206 mm wide x 100 mm deep x 56 mm high.
• 12 mm natural plywood, unfinished, with exposed layered edges.
• Fixed slotted joints, supporting base and an open back beneath a narrow upper mounting rail.

The 2U x 1U size has a 206 x 100 x 56 mm body. The unit labels describe the size; this version fixes with screws through its upper rear rail.

Two-hole screw mounting

Two 4 mm through-holes in the upper rear rail, 112 mm centre to centre and 20 mm below the unit top, let you attach the unit to a suitable plywood or timber support. There are no hanging hooks. Fit the bare rail first for clear screwdriver access, then assemble the body around it.

Pair it with our plain plywood tool board, mounted securely with clearance behind it. The 3.5 x 30 mm mounting screws pass through the 12 mm rail and extend 18 mm into or through the support. Through a 12 mm board, allow approximately 6 mm behind it for the screw tips. The mounting board and its structural fixings are separate.

Supplied flat pack

Includes 5 CNC-cut panels, 14 assembly screws and two mounting screws, all 3.5 x 30 mm, plus an illustrated guide. Clamp joints square and pre-drill receiving edges with a 2 mm bit before fitting screws. Pre-drill the timber mounting support with a 2 mm bit too. Contents and tools are not included. Keep contents secured for travel.

Images are renders of the current cutting model; natural wood grain and colour vary.

Downloads

Revision B build and fitting guide (PDF) · Revision B packing checklist (PDF)