GRID Sloped Storage Box - Natural Plywood Wall Organiser

Keep workshop essentials together in a compact open-top box. A solid front and sides that rise towards the rear create useful storage with a natural plywood finish.

Your storage space

• Clear internal width 280 mm and depth 80 mm. Front/back heights above the floor: 100/130 mm.
• Overall: 304 mm wide x 128 mm deep x 142 mm high.
• 12 mm natural plywood, unfinished, with exposed layered edges.
• Fixed slotted joints, supporting base and an open back beneath a narrow upper mounting rail.

The front and rear heights are measured above the inside floor. The box retains its original 280 x 80 mm clear storage envelope; the rear stays open below the mounting rail.

Two-hole screw mounting

Two 4 mm through-holes in the upper rear rail, 210 mm centre to centre and 20 mm below the unit top, let you attach the unit to a suitable plywood or timber support. There are no hanging hooks. Fit the bare rail first for clear screwdriver access, then assemble the body around it.

Pair it with our plain plywood tool board, mounted securely with clearance behind it. The 3.5 x 30 mm mounting screws pass through the 12 mm rail and extend 18 mm into or through the support. Through a 12 mm board, allow approximately 6 mm behind it for the screw tips. The mounting board and its structural fixings are separate.

Supplied flat pack

Includes 5 CNC-cut panels, 14 assembly screws and two mounting screws, all 3.5 x 30 mm, plus an illustrated guide. Clamp joints square and pre-drill receiving edges with a 2 mm bit before fitting screws. Pre-drill the timber mounting support with a 2 mm bit too. Contents and tools are not included. Keep contents secured for travel.

Images are renders of the current cutting model; natural wood grain and colour vary.

Downloads

Revision B build and fitting guide (PDF) · Revision B packing checklist (PDF)