ROLL Campervan Rock and Roll Bed - 1000, 1100 & 1200mm Plywood
Fit check Make sure it fits before you order Guide
- Measure the usable side-wall width. Check clear space from the bulkhead area towards the rear doors, allowing for trim, tie-down points and any existing lining.
- Measure available height from the van floor. Make sure the selected height clears roof ribs, windows, handles and anything mounted on the side wall.
- Check the depth works in your layout. Confirm it will not clash with doors, tools, wheel arch position or the space you need down the centre of the van.
Plan your bed before you order. Open the ROLL bed configurator to compare widths and Offset layouts, see seated and open previews, and download a dimensioned drawing.
Made to order. Available in five ROLL models.
Make room to sit, sleep and store with the 888CamperWorks ROLL. This plywood campervan bed combines a folding bench and sleeping platform with two front cupboards, rounded profiles and integrated finger pulls.
Choose from 1000, 1100 or 1200 mm widths, with additional Offset layouts in 1100 and 1200 mm. Every model has an 1800 mm sleeping platform and a compact 900 mm supporting base.
Natural plywood, useful storage
- 18 mm natural structural plywood.
- Three folding deck sections with ventilation slots.
- Two cupboard doors with rounded corners and recessed finger pulls.
- A clean front with concealed screw heads.
- An open rear for access to the space beneath the bed.
Choose your width and layout
The deck extends beyond the 900 mm base on both sides. The Offset layouts place more of the deck to the right, giving you another option when planning the furniture and wheel-arch space in your van.
| Model | Bed width | Left overhang | Right overhang |
|---|---|---|---|
| ROLL 1000 | 1000 mm | 25 mm | 75 mm |
| ROLL 1100 | 1100 mm | 75 mm | 125 mm |
| ROLL 1100 Offset | 1100 mm | 25 mm | 175 mm |
| ROLL 1200 | 1200 mm | 125 mm | 175 mm |
| ROLL 1200 Offset | 1200 mm | 100 mm | 200 mm |
Left and right are measured when standing in front of the cupboard doors. They do not indicate a particular driver or passenger side. Standard models also have a small rightward offset; use the measurements above to choose your layout.
Dimensions
- Open: chosen width × 1800 mm long × 420 mm deck height.
- Closed: chosen width × approximately 973 mm deep × 948 mm high.
- Supporting base: 900 mm wide on every model.
- Material: 18 mm structural plywood.
Dimensions describe the bare plywood furniture, without cushions or a mattress. Allow room for the full opening movement, bedding, neighbouring cupboards and access to the doors.
Plan your installation
Check your finished van measurements before choosing a model. Wheel-arch and vehicle fit depend on your installation. ROLL is furniture for use while parked; it is not a passenger travel seat and has no seat-belt provision.
Mattress and cushions are separate. Images are CAD renders of the plywood design; natural grain varies and hardware is omitted from the illustrations.
Contact us about your ROLL layout, supply details and lead time, or browse our campervan furniture range.
Delivery or collection
Pallet delivery: £80. Alternatively, choose free collection from Medway, Kent at checkout. Collection is arranged when your order is ready. No parcel delivery.